888-867-1800

EnviroCaddie Fast-Drying Paint Products

Our EnviroCaddie paint formulation is a modified, super-fast air-dry acrylic that provides superior adhesion, exterior durability, rust protection, and high-gloss retention. When sprayed by the EnviroCaddie, paint performance and productivity is greatly increased while cost, compared to the aerosol can, is dramatically reduced.Water-reducible protective primers can be applied by brush, roller, or spray. Our EnviroCaddie Black Aqua Enamel paint formulation is a modified, super-fast air-dry acrylic that provides superior adhesion, exterior durability, rust protection, and high-gloss retention. When sprayed by the EnviroCaddie, paint performance and productivity is greatly increased while cost, compared to the aerosol can, is dramatically reduced. Paint comes packaged two gallons per order.

Benefits include:

  • Easy to apply
  • Fast air-drying
  • Superior adhesion and early moisture resistance
  • No flash point due to the presence of water
  • Excellent flexibility
  • Low odor for better working conditions

Surface Preparation

All surfaces should be cleaned and free of dirt, salt, oil, grease, chemical deposits, and other surface contaminants by washing with a commercial detergent or suitable cleaner. High-gloss surfaces should be scuff sanded to ensure good adhesion. Surface should be dry when painted.

Application Process If reduction is necessary, reduce only with hot water. A light mist coat may be applied immediately followed by a heavier second coat. In many cases a heavier first coat, evenly applied, will provide adequate hiding and coverage. A medium 3/8″ soft woven cover is recommended for rolling and .013 to .015 tip is recommended for airless spray application. Ambient air, paint and substrate temperature should be at least 50 degrees at the time of application.

Dry Times When evenly applied at the recommended dry film thickness of 1-1.25-Mil, SPC WR Protective Primer should be dry to touch in 45-60 minutes and dry to handle in 4-6 hours at 77 degrees F. and 50% relative humidity. High film thickness, low air movement, and/or high humidity will increase the dry times.

Clean Up Water clean-up for spray guns and equipment. Butyl Cellosolve may also be used.

Storage Store above freezing (32 degrees F). Do no freeze. Mild agitation is recommended before use.

Non-Recommended Uses: Not recommended for galvanized steel, aluminum, concrete, cement block or immersion service.

Paint comes packaged two gallons per order.  5-gallon and quart sizes are also available.